{tab Descrição} The ConnectCore 9P 9215 module delivers a powerful, secure, and compact network-enabled 150 MHz NS9215 processor solution with ARM9 core, a rich set of peripherals and unique interface flexibility. With leading features like an on-chip AES encryption engine, two independent and fully programmable flexible interface modules and Digi's patented dynamic power management options, it is the ideal solution for today's networked embedded applications.
Para conhecer o kit de desenvolvimento disponível para este módulo, clique aqui.
{tab Modelos}
Para conhecer o kit de desenvolvimento disponível para este módulo, clique aqui.
{tab Características}
Specifications | ConnectCore™ 9P 9215 |
Hardware | |
Processor Type | 32-bit NS9215 processor |
ARM Core | ARM926EJ-S |
Cache | 4k I-Cache/4k D-Cache |
Processor Speed | 150 MHz |
Memory Base Population | Up to 16 MB NOR flash Up to 32 MB SDRAM |
Additional Population Options | RJ-45 Ethernet connector 2 / 4 / 8 / 16 MB NOR flash 8 / 16 / 32 MB SDRAM |
Flexible Interface Modules (FIMs) | 2 x 300 MHz DRPIC165X CPUs with 2k program/192 bytes data RAM |
On-chip 256-bit AES Accelerator | • |
Power Management Modes | On-the-fly clock scaling; Low-power sleep modes; Configurable scaling/wake-up events (RTC, ADC, EIRQ, UART, etc.) |
Pins/Form Factor | Small-footprint module with 2 x 80-pin board-to-board connectors |
UART | Up to 4 high-speed UARTs; Maximum data rate 1.8432 Mbps |
GPIO | Up to 64 GPIOs; 2 external IRQs |
SPI | Master data rate 33.3 Mbps; Slave data rate 7.5 Mbps |
I2C | v1.0 bus interface; 7-bit and 10-bit address modes |
External Memory Bus | 17-bit address and 16-bit data bus with 2 external chip select |
ADC | 12-bit/8-channel; External reference |
Timers/PWM | Up to ten 16-/32-bit timers/counters Modes: internal timer with external terminal count option, external gated timer, event counter Up to 5 PWM functions |
LEDs | 2 (general purpose) |
POR controller | • |
Watchdog Timer (16-bit) | • |
Real-Time Clock | With 64 bytes of NVRAM and external battery backup |
JTAG interface | • |
Quadrature Decoder/Counter | • |
5V Tolerant General Purpose and Memory Inputs | • |
Dimensions (L x W x H) | 1.97 in (50 mm) x 1.97 in (50 mm) x 6.1 mm (population option w/o RJ-45) |
Network Interface - Wired | |
Standard | IEEE 802.3 |
Physical Layer | 10/100Base-T |
Data Rate | 10/100 Mbps (auto-sensing) |
Mode | Full or half duplex (auto-sensing) |
Environmental | |
Operating Temperature | -40° C to +85°C |
Storage Temperature | -50° C to 125° C (-58° F to 257 °F) |
Relative Humidity | 5% to 95% (non-condensing) |
Altitude | 12,000 feet (3,658 meters) |
Power Requirements (3.3V) | |
Maximum | 554 mA (1.83 W) |
Typical | 443 mA (1.46 W); UART B/D and Ethernet on |
Idle | 208 mA (686 mW); /16 clock scaling, Ethernet on |
Sleep | 46 mA (151 mW); EIRQ wake-up, Ethernet PHY off |
Regulatory Approvals | |
FCC Part 15 Class B, EN 55022 Class B | • |
EN 61000-3-2 and EN 61000-3-3 | • |
ICES-003 Class B, VCCI Class II, AS 3548 | • |
FCC Part 15 Sub C Section 15.247 | • |
IC RSS-210 Issue 5 Section 6.2.2(o) | • |
EN 300 328, EN 301 489-17 | • |
UL 60950-1, EN 60950 (EU) | • |
CSA C22.2, No. 60950 | • |
EN 55024 | • |
Japan | Regulatory approvals pending |
Para conhecer o kit de desenvolvimento disponível para este módulo, clique aqui.
{tab Aplicações} {tab Documentação} Ambiente de desenvolvimento
Documentação de suporte
Para conhecer o kit de desenvolvimento disponível para este módulo, clique aqui.
{/tabs}